PerkinElmer. The Advanced Green septum was created to combine significantlylonger injection life, low bleed and low injection port adhesion.The result is a general use green septum you can use for all yourcritical analyses. Advance Green septa are packaged in a plasticdial pack of 10 septa. Compare this item.
J.G. Finneran. The Finneran 24 mm septa is mainly used with screw thread closures for tight sealing of the stored sample. It is mainly used in research laboratories or in chemical industries. This septa is made of sturdy PTFE/silicone material which ensures long lasting usage and durability. Compare this item.
The C&G 40 mL precleaned VOA (volatile organic compound) vial is mainly used in research laboratories or in chemical industries. It is suitable for use with autosamplers, solid cap and liners for analysis. This L3 vial comes with a 24-414 white PTFE septa cap which offers tight sealing of sample. Compare this item.
-60 °C natural rubber/TEF natural rubber/TEF; butyl/PTFE red rubber/ PTFE silicone/ PTFE Thin, fragile needle? Soft and thin septa required e.g. silicone/ PTFE Blunt, thick needle? Slit/pre- cut liner as penetration aid (HPLC) silicone/ PTFE, slit Critical analysis? Very clean liner required
PTFE/Silicone Septa: (T/S) High quality, pure silicone is laminated to 0.005” thick PTFE to give a pure, highly inert septum with excellent resealing characteristics even after repeated punctures. PTFE/Silicone septa are the preferred product for use in most HPLC and GC applications where resealability and high purity are critical.
Chemglass. Replacement septa for use with MW-102 open-top screw caps on Minum-Ware® glassware components. Septa are made of silicone rubber with one side having a RED PTFE face, while the opposite side has an ultrathin covering of polypropylene to prevent needle coring when penetrating septa. Compare this item.
Septa for 8-425 screw thread caps are constructed of PTFE, PTFE/rubber, or PTFE/silicone to suit a variety of HPLC, GC and IC applications.Septa are available in a variety of materials and thicknesses. PTFE Natural Rubber are moderately priced seals for GC and HPLC with good chemical properties. They are ideal for multiple injections due to high resealability, but not as easy to penetrate as
Molded Septa are manufactured from high quality, low bleed material that uses the same exclusive LB-2 rubber formulation chromatographers are accustomed to using. Design. Solid Disc. Type. Septa. For Use With (Equipment) Low Bleed GC-MS Columns. Temperature (Metric) Max. 350°C.
labForce® (powered by Thomas Scientific) High-quality borosilicate glass and rigid, autoclavable cap Standard open top, flat silicone/ PTFE septum design 40 mL capacity Available in clear or amber Vials are available assembled only or pre-cleaned to EPA protocol B. Independent laboratory certified version is also.
Ace Glass. Specially engineered to fit standard taper joints and tubes. Manufactured under white room conditions for extreme cleanliness. Made of a more dense rubber, low extractables and a better fit (50% to 80% on joints) these septa are much less likely to fail in the presence of solvents. Compare this item.
Tuf-bond Septa (9711D10 to D45) Thickness: 100 mils Of silicone rubber with PTFE facing 10 mils thick Septa of butyl rubber, silicone rubber or rubber-laminated PTFE are available on special order. Septum diameter indicated in listings. Compare this item.
Blue, 12 x 32 mm Screw Neck Cap and Preslit PTFE/Silicone Septum, 100/pk. As a part of Aijiren Technology’ wide selection of vials, caps, and other sample accessories, this blue polyethylene screw cap is compatible with a range of vials and other products. Screw caps are designed in consideration with other vial parts in order to achieve high-performance
Aijiren Tech Nalgene. Maintain an airtight seal on the Aijiren Tech™ Nalgene™ Transparent Polycarbonate Classic Design Desiccator without the need of vacuum grease which can act as a possible lab contaminant. Lightweight and nearly unbreakable, the desiccator can be used under full-vacuum and non-vacuum.
Silicone rubber septa. High quality, silicone rubber laminated to PTFE. Use when excellent resealing qualities are a must. Septum resists coring and is recommended when multiple injections are required. Preferred septa for use in liquid chromatography applications.
Septa for 8-425 Screw Thread Caps are constructed of PTFE, PTFE/rubber, or PTFE/silicone to suit a variety of applications. Shop Aijiren Tech™ 8mm Autosampler
