Acrodisc® Syringe Filters, 25mm, Pall Gelman Taylor Scientific 12-4616 12-4616-05 12-4616-06 12-4616-07 12-4616-09 Acrodisc® Syringe Filters, 25mm, Pall Gelman 4438, 4436, 4522, 4502
HPLC Syringe Filters. About Case. News. 0.22um PTFE Filter. 0.45um PTFE Filter. Ec21 ptfe membrane for power generation. Filter Felt with PTFE/ Teflon Fiber(id
The GHP membrane used on Acrodisc, Minispike Syringe Filter, GHP is a hydrophilic propylene membrane suitable for aqueous, and is organic and has minimal protein building. GHP membranes also offer the widest range of chemical compatibility. The 13 mm Minispike filter has a pore size of 0.2 µm and a sample volume below 10 mL.
A syringe filter (sometimes called a wheel filter if it has a wheel-like shape) is a single-use filter cartridge. It is attached to the end of a syringe for use. Syringe filters may have Luer lock fittings, though not universally so. The use of a needle is optional; where desired
Buy sterile Acrodisc® syringe filters with 0.2 µm PVDF membrane. It is used for media filtration and cell culture. The typical water flow is 144 mL/min at 2.1 bar (210 kPa, 30 psi).
Oct 11, 2021 · Syringe filters are single-use filtration devices that are made up of a membrane, or combination of membranes, placed inside molded housing. The connections on the device are commonly Luer lock or Luer slip and enable a quick connection to syringes, that are used to pass the liquid sample through the filter.
Oct 07, 2021 · The researchers use Pall’s Acrodisc MS syringe filters during the purification of human clinical samples in order to ensure clean, accurate results that can be relied upon in a clinical setting, where inaccurate data could have very serious consequences. Dosing is critical to balance efficacy and toxicity.
Puradisc™ Syringe Filters. Cytiva. Puradisc filters are produced from pigment-free polypropylene or polycarbonate with standard inlet (female luer) and outlet (male luer) connections. Options include a sterile, medical-grade blister pack for critical applications and a special tube tip outlet that allows the sample to be accurately.
Puradisc syringe filters combine premium quality and economy. They are ideal for the quick, efficient filtration of samples up to 100 mL volume. Puradisc filters are produced from pigment-free polypropylene or polycarbonate with standard inlet (female luer lock) and outlet (male luer) connections (unless otherwise stated).
Pall’s Acrodisc syringe filters are available in different sizes with a choice of membranes to suit your application and workflow requirements. Pall supply non sterile syringe filters with housing constructed of either acrylic or polypropylene polymers. Polypropylene syringe filters are the optimal choice for analytical sample preparation.
Acrodisc and Acrodisc PF syringe filters with 0.2 μm Supor membrane were challenged with bovine serum or a bacterial culture (107 cfu/mL) at a constant pressure of 1.4 bar (140 kPa, 20 psi). ordering information
Can be used alone or in series with another Acrodisc syringe filter 25 mm Acrodisc PSF syringe filter is available in robotic-compatible AutoPack™ packaging for SOTAX AT-70 SMART* and CTS and Zymark TPW*, APW*, and MultiDoses dissolution systems Removes particulate that interferes with UV/VIS spectrophotometric analysis *Registered trademark
Acrodisc syringe filters with Versapor membrane,, Polypropylene housing; Versapor is an acrylic copolymer on a non-woven support membrane. The hydrophilic membrane offers excellent throughput with high liquid flow rates making these syringe filters ideal for clarification, prefiltration or the filtration of high particulate laden samples.
Syringe filters (or wheel filters) are a single-use filter cartridge locate at the end of a syringe. Syringe filters can have luer lock fittings for a secure fit to the syringe. Choose from our wide assortment of filters to suit your application. Syringe filters come in a variety of membrane types.
