Polyethersulfone syringe filters - a comprehensive range of non-sterile disposable syringe filters for reliable sample preparation. Skip to content FREE DELIVERY WHEN YOU ORDER OVER £100

Nylon Syringe Filters, Johnson Test Papers' Nylon syringe filters provide a general purpose solution for analytical processes. Hydrophilic nylon is perfect for aqueous (non-acidic) or organic sample preparation and HPLC, GC or dissolution sample analysis. With its superior flow characteristics, very low extractable levels and mechanical stability, nylon affords a leading mixture of physical

Minisart® Syringe Filters for HPLC Sample Preparation Sartorius Minisart® with a Polypropylene (PP) Housing are Available in a Choice of Membranes: Hydrophilic Regenerated Cellulose (RC), Nylon (PA) or Hydrophobic PTFE The purpose of using syringe

The rest of the sample was transferred to the EMR cartridge after the first half flowed through. Particles were removed by filtering the sample through an Aijiren premium 0.2 µm glass fiber/nylon syringe filter directly into a 2 mL amber glass vial. An Aijiren

Nylon is a hydrophilic membrane. It is a very clean and strong membrane with a very low extractable level. This is a good choice of'workhorse' membranes, acidic samples are not involved. Due to the characteristics of the nylon syringe filter, it is ideal for HPLC, GC

Puradisc™ 25 Syringe Filters. Cytiva. sample filtration HPLC sample preparation Sterile isolation Autoclavable at 121°C Puradisc 25 is a 25 mm diameter syringe filter for sample volume throughput up to 100 mL . Low hold volumes of <100 µL allow for maximum sample recovery. Applications include HPLC aqueous sample preparation,.

2020/2/17 · Step 2: Attach a syringe filter to the Syringe. Open the syringe filter package so that you can later pick the filter up easily, especially for individually packed sterile syringe filters. a. For sample volume < 10 mL. Draw a small amount of air (about 1 mL) into the syringe before loading the sample solution.

3 Sample preparation About 2 mL of latex LB3 solution was filtered through a 0.2 µm syringe filter, and 2 mL of latex LB5 solution was filtered through a 0.45 µm syringe filter. The filtrate was collected into an autosampler vial for LC analysis. For each kind of syringe

Minisart® Syringe Filters for HPLC Sample Preparation Sartorius Minisart® with a Polypropylene (PP) Housing are Available in a Choice of Membranes: Hydrophilic Regenerated Cellulose (RC), Nylon (PA) or Hydrophobic PTFE The purpose of using syringe

Millex Samplicity ® Filters, 0.45µm. Product Number. Product Description. SAMPLCR01. To be used with the Samplicity Filtration System. Powered by vacuum, the system takes minimal manual effort to filter 1 to 8 samples into standard HPLC vials in seconds, with higher recovery than syringe filters provide.

Nylon Syringe Filter, 30mm, 0.45µm. Part No. A300130B. £ 65.00. Pack Size: 100. Hydrophilic surface, good solvent resistance and medium protein binding. Filtration of all aqueous samples and most organic solvents. Strong mechanical stability. Excellent chemical

Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.

syringe filter membrane performance. Generally, 0.45 µm porosity filters are used to remove particulates from samples and mobile phase solutions. For sterile-filtration, a 0.20 µm porosity filter can be used. Application / Sample* Recommended Filter First

High-particulate, challenging sample filtration: Whatman GD/X filters. Filter even the most difficult samples and use less hand pressure with GD/X syringe filters. Exceptional loading capacity and fast flow rates – prevents back pressure and clogging of membrane. Graduated microfiber prefilter from

These Cronus branded nylon syringe filters (13mm, 0.45µm) are non-sterile disposable syringe filters, designed for reliable sample preparation. Reproducible membrane quality and automated manufacturing processes ensure particulates are removed from each and every sample, extending analytical column lifetime and minimising injection port or valve damage.