Double Luer Lock Syringe Filter- Microlab Scientific Inc is a manufacturer and supplier of unique and innovative products for the chromatography, biotechnology, and filtration products. Our products deliver reliable performance while expediting and simplifying the analysis process See full list on microlabscientific.com

Puradisc filters are produced from pigment-free polypropylene or polycarbonate with standard inlet (female luer lock) and outlet (male luer) connections (unless otherwise stated). These disposable filter devices are designed for use with aqueous or organic solutions containing high debris levels and for aggressive, hard-to-filter solutions.

Filtration of your samples is important as a preventive maintenance step f or HPLC or UHPLC analysis. Keep unwanted particulate matter from entering the injector to increas e column life, shorten run time, and optimize peak shape. Manufactured to a high standard in GE s ISO 9001:2008 certi ed facilities

Denville Syringe Filters are easy to use. They may be used with any luer-lock syringe and are color-coded for easy recognition. The 30mm syringe filters can filter up to 100mL of sample with a retention volume of less than 100µL. The 13mm filters can filter 5 to 10mL of sample and have.

Syringe and Filter Luer-Lock, 0.45 μm porosity, 13 mm diameter disk, 5mL . High Performance Liquid Chromatography . A Study of Filter Types Used in Sample Preparation of Cannabis/Hemp with HPLC Analysis No. HPLC-031

Phenex syringe filters are designed for efficient and rapid filtration of almost any solution prior to analysis, and are optimized for superior flow rates and high throughput. Proper membrane and size selection are the keys to choosing the best product to maintain the integrity of your sample components as well as to protect your system from

2. Select the correct syringe filter per this guide (Refer to page 8). 3. Twist the luer lock end of the filter securely onto the syringe. (Caution: Do not use syringes without a matching luer lock, otherwise the pressure applied may cause the filter to come off unexpectedly). 4.

Nylon Syringe Filters are 100% integrity tested during manufacturing to guarantee filter integrity and sterility assurance. The production processes of Nylon Syringe Filters have been validated and the manufacturing plant is accredited with a registered body to an ISO 9001: 2008 Quality System Standards and meets the CE Certification.

Wholesales luer lock PTFE membrane filter distributor Filtration for HPLC Sample Preparation - Aijiren Tech Scientific 4 mm Puradisc Syringe Filters Membrane Nonsterile without tube tip Nonsterile with tube tip Sterile without tube tip Nylon PVDF PTFE PVDF Nylon PVDF Quantity/pack Pore size (µm) 0.2 6777-0402 6786-0402 6791-0402 50 0.45 6777

• HPLC performance tested • Plain polypropylene housing • 30 mm products pressure rated to 100 psi • Enhanced Luer Lock inlet which provides secure attachment to syringes • Range of filter sizes 4 mm – 30 mm • Low hold-up volume allows for the treatment of small sample volumes with minimal sample loss The premium Titan3 range

Each filter has a female Luer-lock inlet and a male slip Luer outlet Nylon and PTFE membranes are ideal for sample preparation and small volume chemical filtration. Syringe filters with CA (cellulose acetate) or PES (polyether sulfone) membranes are ideal for sterile filtration of buffers, tissue culture media or additives, and other biologicals.

DIN ISO 9001:2015 certified HPLC Columns; Solvents for HPLC; ... Syringe Filter, 25mm 0.45um Nylon 100pk Luer Lock Inlet, Pink. €88.40.

10 x QT Micro filter units with female luer lock inlet and female luer lock outlet. For filter units with female luer lock inlet and male luer slip outlet, see QT Micro™ System – TM6101. 10 x 5cc syringes of FTM growth media; Log sheet included; Gummed labels included

The syringe filters are HPLC certified and validated for retention efficiency, extractables, fitment and burst pressure. These syringe filters are produced with validated processes and QA/QC systems to ensure inter-lot as well as intra-lot consistency. $0.00; Ex Tax: $0.00

Hydrophilic Nylon is ideal for aqueous (non-acidic) or organic sample prep and HPLC, GC or dissolution sample analysis. With its excellent flow characteristics, very low extractable levels and mechanical stability, Nylon offer the best combination of physical parameters to meet the most stringent analytical needs in 4mm, 13mm, 17mm, 25mm, 33mm