Nylon Syringe Filters, 0.22/0.45 Micron Syringe Filters for HPLC - Hawach.
Aijiren Tech Nalgene. Aijiren Tech Nalgene sterile syringe filters are ideal for sterilizing (0.2 micron) or clarifying biological solutions, such as cell culture and microbial media, reagents and additives, proteinaceous solutions, and buffers. PES (polyethersulfone) – Lowest protein binding and.
Because of their low inherent levels of extractables, nylon membrane syringe filters are commonly used to filter samples that are intended for HPLC analysis. Nylon membrane syringe filters may not be suitable for all samples and are ideal for near neutral pH aqueous solutions and compatible nonaqueous solvents.
These syringe filters are available with many different membranes, in both sterile and non-sterile varieties, and with or without pre-filters. Properties. Polypropylene or Acrylic housing; Multifunctional connectors - equipped with luer-lock or luer-slip female connections; Nylon,PTFE, PVDF,MCE,PP available ; 0.2 micron , 0.45 micron
Nylon filters are naturally hydrophilic and no wetting agents are used in manufacture. With an extractable level <0.0015 mg/cm2, they are ideal for HPLC solvent and sample preparation. Because of high non-specific binding, they are not recommended for protein solutions. Compatible with aqueous and most organic solvents.
Home » News » HPLC Syringe Filter » EXW price 0.2 micron hplc filters Advantec Advantec Unlaminated PTFE Hydrophilic Membranes - PTFE Membranes Advantec's line of unsupported, hydrophilic, pure PTFE membranes are ideally suited for use in HPLC separations and other applications involving mixtures of aqueous and organic solvents.
Highly resistant to chemical and thermal extremes, Teflon is an ideal membrane for use in filtration of aggressive chemicals, extreme operating temperatures and where critical filtration is required. Available micron pore sizes 0.03, 0.05, 0.1, 0.2, 0.45, and 1.0. Nylon Membrane. Broad chemical compatibility.
Nylon filters are compatible with a broad range of solvents. Two types are available: 1) Nylon Membrane Filters with pore sizes ranging from 0.20 to 1.2 µm, and 2) Woven Net Filters with mesh openings ranging from 5 to 180 µm. Our 5 µm Nylon Woven Net Filter (NY054700) is commonly used in the automotive industry for cleanliness analysis.
CENTREX centrifuge filters are supplied with a range of filtration and separation media. 1.5 mL and 5.0 mL sterile and nonsterile versions are available. Features and Benefits: Centrifugal filter units with various types of membrane filter. Rapid and simple preparation of a large number of samples. More than six samples can be processed at once.
0.2 µm, Nylaflo (Nylon) membrane (100/pkg) - HPLC Mobile Phase Filtration Membranes “Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications.
Nylon membrane disc filters: 0.2 µm pore-size, 47 mm diameter, pack of 100. Hydrophilic, low-extractable, inert, durable material supported by an internal polyester web. Typically used for HPLC, microbiology, medical/clinical, and general filtration.
Sample filtration using syringe filters containing 0.45 μm (HPLC) or 0.2 μm (UHPLC) pore size membranes will also extend the life of chromatography columns. The use of nylon syringe filters in analytical chemistry sample preparation has long been established.
Millex Syringe Filter, Nylon, HPF, Non-sterile 0.20 µm pore size, 25 mm diameter, Millex-GN Nylon membrane with glass fiber prefilter, hydrophilic, domed housing - Find MSDS or SDS, a COA, data sheets and more information.
0.2 Nylon Polypropylene 176-0020* 100/400 0.45 Nylon Polypropylene 176-0045* 100/400 25mm diameter for 10 - 100 ml volume 0.2 SFCA Polypropylene 724-2020* 500 0.45 SFCA Polypropylene 724-2045* 500 0.8 CA Polypropylene 724-2080* 500 0.2 Nylon Polypropylene 726-2520** 50 0.45 Nylon Polypropylene 726-2545** 50 0.2 Nylon Polypropylene 727-2020* 500
