Millex-LCR for Samplicity G2, 0.45 µm, hydrophilic PTFE, 33 mm, non-sterile This 33 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous & organic solutions prior to chromatography or other instrument analyses.

Description. Millex™-LG, LCR filters contain hydrophilic PTFE membranes and are HPLC-certified. for low levels of UV-absorbing extractables. Hydrophilic PTFE membranes have broad chemical compatibility, enabling filtration of aqueous and organic solvents. 33 mm hydrophilic PTFE Millex™ filters have faster flow rates than 25 mm filters.

The Millex® HPF LCR syringe filter includes both a graduated glass fiber prefilter (10.0 to 0.7µm) to remove larger particles and a 0.2µm membrane filter for fine filtration. This combination of media provides two to four times greater throughput than standard syringe filters without prefiltration media, especially when filtering particle-laden solutions. Manufactured with a low

3 33 mm Nylon Nylon with GF prefilter Nylon Hydrophilic PTFE Acetonitrile Blank 0.2 0.15 0.1 0.05 0 0 2 4 6 8 10 Time, minutes Absorbance @ 214nm, mAU 12 14 16 18 20 0.05 Acetonitrile Sample Preparation for Chromatography Non-sterile, low-extractable filters for clarification or fine particulate removal prior to instrument analysis.

Hydrophilic PTFE membranes are ideal for preparing samples and mobile phases prior to liquid chromatography (LC) or mass spectrometry (MS) analysis and can be used to filter aqueous solutions without prior wetting. Syringe filters are available in two pore sizes and three diameters to optimize results.

Overview of Non-Sterile Millex® Syringe Filters with Hydrophilic PTFE. •Lowest extractables, optimizing background levels of sensitive analyses like UHPLC and LC-MS. •Filtration of protein-containing aqueous or organic solutions. •Available in 0.20 μm and 0.45 μm pore sizes and three diameters to suit your application needs.

Millex Samplicity® 0.45 µm and 0.20 µm PTFE filters provided very clean extracts without addition of extractable impurities to the samples. When using MS as the detection method, the Millex Samplicity® filters actually provided cleaner extracts than those prepared using a non-EMD Millipore LC-MS-certified syringe filter.

Millex® Syringe filters set the standard for reliable small volume filtration (1 mL to 200 mL). Available in 4, 13, 25, 33, and 50 mm diameters Minimal hold-up volume for less sample loss o f small volumes and are ideal for solutions such as antibiotics and tissue culture additives.

SLGVM33RS. MilliporeSigma. 33 mm Medical Millex Filter Units A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Medical Millex filters remove microorganisms, particles, precipitates, and undissolved powders larger than 0.22 μm from aqueous solutions. 33 mm. Compare this item.

MILLEX® Sterile Syringe Filters Hydrophobic PTFE Membranes MilliporeSigma (PES) membrane Durapore® PVDF membrane is the lowest binding membrane for protein-rich solutions Many are CE-marked and/or approved as medical devices, meaning that they can be used to filter pharmaceutical solutions Minimal leaching of impurities into filtered solutions

Description. Millex™-LG, LCR filters contain hydrophilic PTFE membranes and are HPLC-certified. for low levels of UV-absorbing extractables. Hydrophilic PTFE membranes have broad chemical compatibility, enabling filtration of aqueous and organic solvents. 33 mm hydrophilic PTFE Millex™ filters have faster flow rates than 25 mm filters.

SLFG025NK. MilliporeSigma. This 25 mm Millex® syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in fine particle removal from organic solvents. Syringe filter consists of a membrane sealed in a high density polyethylene housing Filter is non-sterile,.

Syringe filter Millex-FG 25mm PTFE 0.2um Non-sterile / PK 50 Login to view pricing 25 mm diameter non-sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane Chat Now FAQs - FILTRATION

Millex filter units with hydrophobic Fluoropore membrane are ideal for sterilizing gases, venting sterile containers, and sterilizing or clarifying organic solutions. Specialized filter units protect hemodialysis transducers from blood and moisture. 50 mm Millex filter units are also used for vacuum line protection. All units are bi-directional.

Overview of Non-Sterile Millex® Syringe Filters with Hydrophilic PTFE. •Lowest extractables, optimizing background levels of sensitive analyses like UHPLC and LC-MS. •Filtration of protein-containing aqueous or organic solutions. •Available in 0.20 μm and 0.45 μm pore sizes and three diameters to suit your application needs.